2012 NEW R&D plastic printing ink

Plastic Printing Ink 1.for any offset press and normal paper 2.ink granula is 5um 3.passed MSDS,DGM,SGS

Plastic Printing Ink1.for any offset press and normal paper 2.ink granula is 5um 3.passed MSDS,DGM,SGS

                                                               2012 NEW R&D plastic printing ink

The sublimation offset printing ink made in Jiangsu Taige Printing Ink Co.,Ltd is selected high quality raw materials. What’s more ,it owns stable performance, high transfer rate and all kinds of standards have reached international level of similar products .It is environment-friendly and used for a variety of the domestic and imported offset printing.

China Taige sublimation thermal transfer offset printing ink

-Quick-drying ink printing materials: Coated paper, coating paper, offset paper and all kinds of paper

-Offset ink Features: solid speed, good stability on the machine, clear dot reproduction, excellent ink-water balance.

 A series of thermal ink color: Magenta ,Yellow ,Green , Black.

- Use the methods and precautions:

1 It can be directly on the machine under normal circumstances;

2Because of temperature, paper, printing speed and other factors, according to the following rule changes;

- To speed up the drying can be added to the mixed desiccant, the dosage of 0-2%;

-With a special diluent;

-To adjust the liquidity available 6 # Printing Mexican oil, the amount of 0-5%;

-Descending paper sticky, remained liquidity unchanged, available to the viscosity, the amount of 0-5%;

-While reducing the viscosity and viscosity, can add 52-94, the amount of 0-5%.

- Notice: It apply to offset printing machine.Speed is below 8000r/h.Before using the printing plate you should Play the sample first ,if there is no deviation and then determine the comp Engraving and Printing. Because the sublimation ink for gas coloring, it is not ordinary printing according to the proportion .

Application examples:

a. To get 50%C on fabric, the color on paper should be 30%C;

b. To make red PS-plate, the ratio is 100%M and 35%-40%Y;

c. To make blue PS-plate, the ratio is 100%C and 20%M;

- Quick-drying offset printing ink Printed list of the desired temperature (for reference)----- Aluminum plate, stainless steel, copper and porcelain coated, the thermal transfer the desired temperature can refer to the temperature of the polyester fabric.

Name of fabric	Transfer temperature	pressure	Time
Polyester fabric	205°C~220°C	0.5kg/cm2	10~30 seconds
Polyester deformation fabric low elastic	195°C~205°C	0.5kg/cm2	30 seconds
Triacetate fabrics	190°C~200°C	0.5kg/cm2	30~40 seconds
Nylon fabric	195°C~205°C	0.5kg/cm2	30~40 seconds
Acrylic fabric	200°C~210°C	0.5kg/cm2	30 seconds
Two acetate fiber fabric	185°C	0.5kg/cm2	15~20 seconds
Polypropylene nitrile	190°C~220°C	0.5kg/cm2	10~15 seconds

- Dyeing solid (grade)

exposure to sunlight	red	yellow	green	black
	5-6	6	4	4

Tips: we can provide samples to customers, the 1kg ink can be printed on paper of 400 square, to help customers reduce production costs largely. Looking forward to cooperate with you.

2012 NEW R&D plastic printing ink